728x90 반응형 SMALL OpenStack6 오픈스택 클라우드 서버 구축(Stein)(13)-Block Storage(Cinder) 설정(Multi) #Storage Node 설정 1) Configure Storage Node. 더보기 [root@storage ~]# yum -y install nfs-utils [root@storage ~]# vi /etc/idmapd.conf # 5번 줄 수정 Domain = srv.world [root@storage ~]# vi /etc/cinder/cinder.conf # add follows in the [DEFAULT] section enabled_backends = lvm,nfs # 마지막 줄 추가 [lvm] target_helper = lioadm target_protocol = iscsi # IP address of Storage Node target_ip_address = 10.0.0.50 volume.. 2023. 2. 2. 오픈스택 클라우드 서버 구축(Stein)(11)-Block Storage(Cinder) 설정(LVM) #Storage Node 설정 1) Create a volume group for Cinder on Storage Node. 더보기 [root@storage ~]# pvcreate /dev/sdb1 Physical volume "/dev/sdb1" successfully created [root@storage ~]# vgcreate -s 32M vg_volume01 /dev/sdb1 Volume group "vg_volume01" successfully created 2) Configure Cinder Volume on Storage Node. 더보기 [root@storage ~]# vi /etc/cinder/cinder.conf # add follows into [DEFAULT] section enab.. 2023. 2. 2. 오픈스택 클라우드 서버 구축(Stein)(10)-Block Storage(Cinder) 구성 #Controller Node 설정 1) Add a User or Endpoint for Cinder to Keystone on Control Node. 더보기 # add cinder user (set in service project) [root@Controller ~(keystone)]# openstack user create --domain default --project service --password servicepassword cinder +---------------------+----------------------------------+ | Field | Value | +---------------------+----------------------------------+ | defau.. 2023. 2. 2. 오픈스택 클라우드 서버 구축(Stein)(9)-LBaaS V2 설치 및 설정 # Controller Node 설정 더보기 [root@Controller ~(keystone)]# yum --enablerepo=centos-openstack-stein,epel -y install openstack-neutron-lbaas net-tools [root@Controller ~(keystone)]# vi /etc/neutron/neutron.conf service_plugins = router,lbaasv2 [root@Controller ~(keystone)]# vi /etc/neutron/neutron_lbaas.conf # 마지막 줄에 추가 [service_providers] service_provider = LOADBALANCERV2:Haproxy:neutron_lbaas.drive.. 2023. 2. 2. 이전 1 2 다음 728x90 반응형 SMALL