>> Main# boot
------------------------------------------------------------
[Boot Options Menu]
image - Select software image to use on next boot
conf - Select config block to use on next boot
gtimg - Download new software image via TFTP
ptimg - Upload selected software image via TFTP
reset - Reset switch [WARNING: Restarts Spanning Tree]
cur - Display current boot options
>> Boot Options# conf
Currently set to use active config block on next boot.
Specify new block to use ["active"/"backup"/"factory"]: factory
Next boot will use factory default config block instead of active.
>> Boot Options#
>> Boot Options#
>> Boot Options#
>> Boot Options# reset
Confirm clear all config regions [y/n]: y
Reset will use software "image1" and the factory default config block.
>> Note that this will RESTART the Spanning Tree,
>> which will likely cause an interruption in network service.
Confirm reset [y/n]: y
'네트워크 > Alteon' 카테고리의 다른 글
| Alteon L4 Port Mirror설정하기 (0) | 2024.01.23 |
|---|---|
| Alteon L4 명령어 (0) | 2023.02.23 |
| Alteon L4 image 업로드/다운로드 (0) | 2023.02.03 |
| Alteon L4 DSR 구성 설정 (0) | 2023.02.03 |
| Alteon L4 패스워드 초기화 (0) | 2020.02.04 |